EOTech HHS I Holographic Reflex Sight Scope w/G33 3X EXPS3-4 EOHHSI Kit
Very Limited Quantity!
For the infantryman, target ranges vary in ever-changing battlefield conditions. The HHS provides a solution for engaging threats in CQB situations, then quickly transitioning to a 500m targeting or surveillance situation, and then quickly back to a 25m room clearing exercise. Instant transition is achieved through a quick Switch-to Side (STS) mount that offers a simple, quick disconnect feature to remove the magnifier and base. This durable, night vision compatible system offers wide field optical performance with superior light transmission for visibility in extreme low light conditions.
The EXPS3-4 is configured with a new ballistic reticle.. The battle tested circle/dot reticle will be offered along with a series of 1 MOA aiming dots that are vertically aligned and calibrated specifically for the ballistic drop of .223 caliber ammunition. The reticle provides 4 aiming dots for target distances of 0-300m, 400m, 500m, and 600m. The use of a magnifier is stongly recommended.
- Aiming dots may not be distinguishable from each other without magnifcation.
- Single transverse 123 battery to reduce sight length
- Ballistic reticle specific to .223 caliber munitions
- Compatible with Gen I-III+ Night Vision Systems (tandem operation)
- Shortened base only requires at most 2 3/4 inch of rail space
- Battery cap and latch are eliminated and replaced with a simple O-ring, tethered cap; better sealing is achieved
- Average battery life at brightness level 12 is roughly 600 hours
- Side buttons, NV compatible with an adjustable, locking, quick detach lever for easy attachment and removal
Optics: Transmission holography - parallax free
Eye Relief: Unlimited
Length/Width/Height: 8.1 x 2.2 x 2.8 in
Weight: 23.1 oz (689 grams)
Temperature: -40 to 160 F
Waterproof: Submersible to 33 ft depth
Sealing: Fogproof internal optics
Adjustment (per click): 0.5 MOA (1/2" at 100 yds)
Adjustment Range: +/- 40 MOA travel
Mount: 1" Weaver or (MIL-STD-1913) rail. Adjustable for width variation
Return to Zero: Repeatable to within 2 MOA after re-mounting
Night Vision Compatibility: 10 brightness setting (generation I-III+)
Optical Surfaces: Anti-glare coating
Window Dimensions: 1.20" x 0.85" (30 x 23mm)
Front Window Material: 1/8" solid glass
Rear Window Material: Shatter resistant laminate (3/16" thick)
Field of View (100 yds): 30 yds (28m) at a 4" eye relief
Brightness Adjustment Range: 146,000:1 brightest to lowest
Night Vision Brightness Range: 1280:1 with NV switch engaged
Power Source: (1) 123 lithium battery
Battery Life: 600 continuous hours at nominal setting 12
Brightness Settings: 30 settings with scrolling feature (10 settings for NV use)
Auto Battery Check Indicator: Flashing reticle upon start-up
Auto Shut-down: At 8 hrs- programmable to 4 hrs
*This model is controlled under the Export Administration Regualtions (EAR) ECCN 0A987, and may not be exported to a Foreign Person, either in the U.S. or abroad, without a license or exception from the U.S. Department of Commerce.
Magnifcation Fixed: 3.25X
Eye Relief: 2.2 in
Field of View: 7.3 degrees
Length: 3.9 in
Temperature: -40 degrees to 160 degrees F
Sealing: Fogproof Internal Optics
Mount: 34mm ring with integrated dovetail adapter for use with quick release mount
While all Gen 3 and some Gen 2+ require export licenses, all night vision products are subject to United States Export rules and regulations. Valid export licenses may be issued by the U.S. Department of Commerce or the U.S. Department of State, Directorate of Defense Trade Controls, in accordance with the International Traffic in Arms Regulation (ITAR), Title 22, Code of Federal Regulation 120-130. No exceptions!!