Thermal and Night Vision Glossary

This thermal and night vision glossary explains common terms used in product specifications, manuals and buying guides. Use it to compare the technology and features found in thermal optics and night vision optics.

For buying advice, see the Thermal Optics Buyers Guide and thermal resolution guide. For setup and troubleshooting, visit the Know-How Hub. For export restrictions and legal compliance, use the Export Rules and ITAR/EAR Compliance page.

Thermal and Night Vision Glossary: Terms A–Z

AUTOMATIC BRIGHTNESS CONTROL (ABC)

An electronic feature that automatically reduces voltages to the Microchannel Plate to keep the image intensifier’s brightness within optimal limits and protects the tube. The effect of this can be seen when rapidly changing from low-light to high-light conditions; the image gets brighter and then, after a momentary delay, suddenly dims to a constant level.

AUTO-GATED POWER SUPPLY

When the power supply is “Auto-Gated,” it means the system is turning itself on and off at a very rapid rate. This, combined with a thin film attached to the Microchannel plate (an ion barrier) reduces blooming. While “blooming” can be noticeably less on systems with a thin film layer, systems with thicker film layers can be perfectly acceptable depending on the end user’s application. Deciding which night vision goggle is better should not be based solely on blooming.

BLACK SPOTS

These are common blemishes in the image intensifier of the NVD or can be dirt or debris between the lenses of the NVG. Black spots that are in the image intensifier do not affect the performance or reliability of a night vision device and are inherent in the manufacturing processes. Every night vision image intensifier tube is different.

DARK SPOTS / BLEMISHES

Image intensifier tubes used in PVS-14 and similar night-vision systems may show small fixed dark spots when looking through the device. These spots are not dirt, damage, or signs of use — they are a normal cosmetic occurrence in the photocathode/MCP manufacturing process.

Every major tube manufacturer — including Elbit Systems of America (MX-11769 / MX-10160) — and U.S. Military technical documentation states:

“Black spots are acceptable and normal unless they interfere with the field of view or exceed the spot-size/zone limits.”

Tubes are inspected and graded using a zone chart:

• Zone 1 (center) – most strict (usually 0–1 tiny spot allowed)

• Zone 2 (mid ring) – minor cosmetic spots allowed

• Zone 3 (outer edge) – relaxed tolerance

Only tubes that meet the factory spot-allowance specification are released.

These spots do NOT affect performance or brightness.

BIOCULAR

Viewing a single image source with both eyes (example: watching a television set).

BINOCULAR

Viewing a scene through two channels; i.e. one channel per eye.

BLOOMING

Loss of the entire night vision image, parts of it, or small parts of it, due to intensifier tube overloading by a bright light source. Also, known as a “halo” effect, when the viewer sees a “halo” effect around visible light sources. When such a bright light source comes into the night vision device’s view, the entire night vision scene, or parts of it, becomes much brighter, “whiting out” objects within the field of view. Blooming is common in Generation 0 and 1 devices. The lights in the image to the right would be considered to be “blooming”.

BRIGHT-SOURCE PROTECTION (BSP) – HIGHLIGHT CUT-OFF

An electronic function that reduces the voltage to the photocathode when the night vision device is exposed to bright light sources such as room lights or car lights. BSP protects the image tube from damage and enhances its life; however, it also has the effect of lowering resolution when functioning except for the Pinnacle Autogated Units which maintain the systems resolution.

BORESIGHTING

The alignment of a weapon-aiming device to the bore of the weapon. See also Zeroing.

C-MOUNT

A standard still and video camera lens thread size for mounting to the body of a camera. Usually 1/2″ or 3/4″ in diameter.

COMSPEC (COMMERCIAL SPECIFICATION)

A term used to describe image tube quality, testing and inspection done by the original equipment manufacturer (OEM).

CHICKEN WIRE

An irregular pattern of dark thin lines in the field of view either throughout the image area or in parts of the image area. Under the worst-case condition, these lines will form hexagonal or square wave-shape lines.

DAYLIGHT LENS COVER

Usually made of soft plastic or rubber with a pinhole that allows a small amount of light to enter the objective lens of a night vision device. This should be used for training purposes only and is not recommended for an extended period of time. Near field focus only usable in this fashion.

DAYLIGHT TRAINING FILTER

A glass filter assembly designed to fit over the objective lens of a night vision device. The filter reduces light input to a safe (night-time) level, allowing safe extended daytime use of the night vision device.

DETECTION, RECOGNITION AND IDENTIFICATION RANGE

Detection range is the distance at which a heat source can be noticed. Recognition range is the distance at which its general class, such as a person or animal, can be distinguished. Identification range is the shorter distance at which enough detail is available for a confident identification. Published values are estimates and vary with target size, weather, contrast, lens, display and user experience.

DETECTOR RESOLUTION

Thermal detector resolution is the pixel matrix of the sensor, such as 384 × 288, 640 × 512 or 1280 × 1024. More detector pixels can preserve finer scene detail, but resolution should be compared together with pixel pitch, NETD, lens focal length, magnification, processing and display resolution.

DISTORTION

There are two types of distortion found in night vision systems. One type is caused by the design of the optics, or image intensifier tube, and is classical optical distortion. The other type is associated with manufacturing flaws in the fiber optics used in the image intensifier tube. Classical Optical Distortion: Classical optical distortion occurs when the design of the optics or image intensifier tube causes straight lines at the edge of the field of view to curve inward or outward. This curving of straight lines at the edge will cause a square grid pattern to start to look like a pincushion or barrel. This distortion is the same for all systems with the same model number. Good optical design normally makes this distortion so low that the typical user will not see the curving of the lines.

Fiber Optics Manufacturing Distortions: Two types of fiber optics distortions are most significant to night vision devices: S-distortion and shear distortion:

S-Distortion: Results from the twisting operation in manufacturing fiber-optic inverters. Usually S-distortion is very small and is difficult to detect with the unaided eye.

Shear Distortion: Can occur in any image tube that uses fiber-optic bundles for the phosphor screen. It appears as a cleavage or dislocation in a straight line viewed in the image area, as though the line were “sheared”.

EQUIVALENT BACKGROUND ILLUMINATION (EBI)

This is the amount of light you see through a night vision device when an image tube is turned on but no light is on the photocathode. EBI is affected by temperature; the warmer the night vision device, the brighter the background illumination. EBI is measured in lumens per square centimeter (lm/cm2). The lower the value the better. The EBI level determines the lowest light level at which an image can be detected. Below this light level, objects will be masked by the EBI.

EDGE GLOW

There is a defect in the image area of the NVG. Edge glow is a bright area (sometimes sparkling) in the outer portion of the viewing area.

EMISSION POINT

A steady or fluctuating pinpoint of bright light in the image area that does not go away when all light is blocked from the objective lens. The position of an emission point within the field of view will not move. If an emission point disappears or is only faintly visible when viewing under brighter nighttime conditions, it is not indicative of a problem. If the emission point remains bright under all lighting conditions, the system needs to be repaired. Do not confuse an emission point with a point of light source in the scene being viewed.

EYE RELIEF

The distance a person’s eyes must be from the last element of an eyepiece in order to achieve the optimal image area.

F-NUMBER (F/#)

The f-number is the ratio of a thermal lens’s focal length to its entrance-pupil diameter. A lower f-number can admit more infrared energy to the detector, but image performance also depends on lens quality, sensor sensitivity, calibration and processing.

FIELD-OF-VIEW

The diameter of the imaged area when viewed through an optic

FIGURE OF MERIT (FOM)

Image Intensification tube specification designation, calculated on line pair per mm x signal to noise.

FIXED-PATTERN NOISE (FPN)

A faint hexagonal (honeycomb) pattern throughout the image area that most often occurs under highlights conditions. This pattern is inherent in the structure of the Microchannel plate and can be seen in virtually all Gen 2 and Gen 3 systems if the light level is high enough.

FOOTLAMBERT (FL)

A unit of brightness equal to one footcandle at a distance of one foot.

GAIN

Also called brightness gain or luminance gain. This is the number of times a night vision device amplifies light input. It is usually measured as tube gain and system gain. Tube gain is measured as the light output (in fL) divided by the light input (in fc). This figure is usually expressed in values of tens of thousands. If tube gain is pushed too high, the tube will be “noisier” and the signal-to-noise ratio may go down. U.S. military Gen 3 image tubes operate at gains of between 20,000 and 45,000. On the other hand, system gain is measured as the light output (fL) divided by the light input (also fL) and is what the user actually sees. System gain is usually seen in the thousands. U.S. military systems operate at 2,000 to 3,000. In any night vision system, the tube gain is reduced by the system’s lenses and is affected by the quality of the optics or any filters. Therefore, system gain is a more important measurement to the user.

GALLIUM ARSENIDE (GAAS)

The semiconductor material used in manufacturing the Gen 3 photocathode. GaAs photocathodes have a very high photosensitivity in the spectral region of about 450 to 950 nanometers (visible and near-infrared region).

GENERATIONS

Two technologies are referenced as night vision; image intensification and thermal imaging (see definitions). Because of cost and the fact that image intensifier scenes are easier to interpret than thermal (thermal images show targets as black or white – depending upon temperature – making it more difficult to recognize objects), the most widely used night vision aid in law enforcement is image intensification (l²) equipment. To date, there have been four generations of l² devices, identified as Gen 0, Gen 1, Gen 2, and Gen 3. Developmental laboratory work is ongoing, and the U.S. military may designate the resulting as Gen 4. However, no definition for Gen 4 presently exists.

HALO

Halo is the circular region around a bright light that appears “brighter” – It’s caused by elastic collisions of electrons with the MCP surface which subsequently then bounce off and down another hole. Halo’s are the same size all over the screen and the size is dictated by the distance between the photocathode and the MCP. Basically, it’s the round circle around lights when you look at them with Night Vision and it’s generally used as an indication that you’re looking at something that’s too bright

HIGHLIGHT SHUTOFF

An image intensifier protection feature incorporating a sensor, microprocessor and circuit breaker. This feature will turn the system off during periods of extreme bright light conditions.

INTERPUPILLARY ADJUSTMENT

The distance between the user’s eyes (pupils) and the adjustment of binocular optics to adjust for differences in individuals. Improperly adjusted binoculars will display a scene that appears egg-shaped or as a reclining figure-8.

INTERPUPILLARY DISTANCE

The distance between the user’s pupils (eyeball centers). The 95th percentile of US military personnel falls within the 55 to 72mm range of IPD.

IR ILLUMINATOR

Many night vision devices incorporate a built-in infrared (IR) diode that emits invisible light or the illuminator can be mounted on to it as a separate component. The unaided eye cannot see IR light; therefore, a night vision device is necessary to see this light. IR Illuminators provide supplemental infrared illumination of an appropriate wavelength, typically in a range of wavelengths (e.g. 730nm, 830nm, 920nm), and eliminate the variability of available ambient light, but also allow the observer to illuminate only specific areas of interest while eliminating shadows and enhancing image contrast.

IR LASER

High-power devices providing long-range illumination capability. Ranges of several thousand meters are common. Most are not eye-safe and are restricted in use. Consult FDA CFR Title 21 for specific details and restrictions.

IR LASER VS. IR ILLUMINATOR

An IR laser projects a precise aiming or pointing beam that is visible through compatible night vision devices. An IR illuminator spreads infrared light across an area, much like a flashlight that is visible through night vision. Wavelength, power and device class affect range, compatibility and eye safety.

IR (INFRARED)

Area outside the visible spectrum that cannot be seen by the human eye (between 700 nanometers and 1 millimeter). The visible spectrum is between 400 and 700 nanometers.

ITAR (INTERNATIONAL TRAFFIC IN ARMS REGULATIONS)

ITAR is a set of U.S. regulations governing the export of defense articles, technical data and defense services on the United States Munitions List. Some night vision and infrared products may instead fall under other export controls, depending on their classification and destination. Before arranging an international shipment, review our Export Rules and ITAR/EAR Compliance page and the official Directorate of Defense Trade Controls guidance.

LASER RANGEFINDER

This allows you to measure distance to objects. Designed to determine the exact distance between the observer and the target. Measurement results are displayed on the scopes monitor.

LED (LIGHT-EMITTING DIODE)

LED’s are electronic light sources based on the semiconductor diode. When the diode is forward biased, electrons recombine with holes, releasing energy in the form of light. This is called Electroluminescence. The color of the light is determined by the energy gap of the semiconductor. LED’s have many advantages over traditional incandescent light sources including lower energy consumption, longer lifetime, more robustness, smaller size, and faster switching.

LP/MM (LINE PAIRS PER MILLIMETER)

Units used to measure image intensifier resolution. Usually determined from a 1951 U.S. Air Force Resolving Power Test Target. The target is a series of different-sized patterns composed of three horizontal and three vertical lines. A user must be able to distinguish all the horizontal and vertical lines and the spaces between them. Typically, the higher the line pair, the better the image resolution. Generation 3 tubes generally have a range of 64 – 72 lp/mm, although line pair measurement does not indicate the generation of the tube. Some Generation 2+ tubes measure 28-38 lp/mm, (Gen 2 SHP at 54-59 lp/mm typically), while a Generation 1+ tube may have measure at 40 lp/mm.

LUMEN

Denotes the photons perceptible by the human eye in one second.

MONOCULAR

A single channel optical device.

NATO-STANAG

Term for the North Atlantic Treaty Organization STANdard AGreement. This can be described as an international MILSPEC

MA/W (MILLIAMPS PER WATT)

The measure of electrical current (mA) produced by a photocathode when exposed to a specified wavelength of light at a given radiant power (watt).

MCP (MICROCHANNEL PLATE)

A metal-coated glass disk that multiplies the electrons produced by the photocathode. An MCP is found only in Gen 2 or Gen 3 systems. MCPs eliminate the distortion characteristic of Gen 0 and Gen 1 systems. The number of holes (channels) in an MCP is a major factor in determining resolution. ITT Industries’ MCPs have 10.6 million holes or channels compared to the previous standard of 3.14 million.

PIXEL PITCH (MICRON)

Pixel pitch is the center-to-center spacing between detector pixels and is measured in micrometers, or microns (µm). Common thermal detector pitches include 12 µm and 17 µm. A smaller pitch can support a more compact optical design or denser sampling, but it is not automatically better; detector resolution, NETD, lens quality, processing and display quality also affect the final image.

MICROWATTS (UW)

A microwatt is equal to one millionth of a watt. A watt is a derived unit of power in the International System of Units (SI) and measures the rate of energy conversion. One watt is equivalent to 1 joule of energy per second.

MIL-DOTS

The Mil-Dot reticle was designed around the unit of measurement called the milliradian. The dots of a mil-dot reticle allow the shooter to estimate range to a target of a known size, hold over targets with the mil-dots as a reference, and give a recognizable lead for moving targets. The US Army equates each mil to 3.375 MOA while the US Marines equate it to 3.438 MOA. The practical application has become one mil= 3.5 MOA. The Mil-Dot reticle is employed by placing the reticle over the target and aligning one end of the target to the flat of the reticle. The number of Mil-Dots are counted to provide an accurate reading.

MILLIRADIANS (MRAD)

A unit of measurement used to determine the divergence of a laser beam. The milliradian is equal to 0.001 radians and corresponds to an error of 1 meter at 1,000 meters.

MILLIWATTS (MW)

A milliwatt is equal to one thousandth of a watt. A watt is a derived unit of power in the International System of Units (SI) and measures the rate of energy conversion. One watt is equivalent to 1 joule of energy per second.

MOA (MINUTE OF ANGLE)

Commonly used in the shooting world as a point of reference, a Minute Of Angle is 1.047 inches at 100 yards. Normal shooter application uses the simplified 1” at 100 yards. For perspective, the difference between using the exact 1.047 and 1” is 0.47” at 1,000 yards. So, if a reticle has a 1 MOA dot, the dot would cover 1” at 100 yards. MOA is also relative to the click adjustments on scopes and iron sights. Scopes with 1/4MOA clicks would require 4 clicks to shift the bullet impact 1MOA (1”) at 100 yards. The same adjustment would move the bullet impact 1MOA at 200 yards, which is 2 inches. A simple way to calculate MOA at ranges less than 100 yards is to use the 100 yard adjustment and doubling the number of clicks for 50 yards and doubling again for 25 yards. For example, if a scope has ½ MOA click adjustments, it will require 2 clicks to move the bullet 1” at 100 yards, 4 clicks to move the impact 1” at 50 yards and 8 clicks to move it 1” at 25 yards.

NANOMETER (NM)

A unit of length in the metric system equal to one billionth of a meter. Nanometers are the most common unit used to describe the manufacturing technology used in the semiconductor industry and the most common unit to describe the wavelength of light.

NEAR-INFRARED

The shortest wavelengths of the infrared region, nominally 750 to 2,500 nanometers. Also see How Thermal Imaging and Infrared Technology Works.

NETD (NOISE EQUIVALENT TEMPERATURE DIFFERENCE)

NETD describes how small a temperature difference a thermal detector can distinguish and is usually stated in millikelvin (mK). A lower NETD generally indicates better sensitivity in low-contrast scenes, but NETD alone does not determine total image quality.

NUC (NON-UNIFORMITY CORRECTION)

NUC, often called calibration, corrects small response differences among detector pixels. A thermal optic may perform NUC automatically or let the user trigger it manually; a brief image pause or shutter sound during calibration is normal on many devices.

NOISE (HIGH PITCHED SOUND)

The sound you can hear is the high voltage transformer unit in operation. Auto gated tubes will produce this high pitched noise. The sound can be softer or higher at times, depending on how much the auto gated needs to perform. It is normal and it may be possible to hear this sound from a distance 2-5 meters.

NSN (NATIONAL STOCK NUMBER)

13-digit code identifying all ‘standardized material items of supply’ as they have been recognized by the United States Department of Defense. National Stock Numbers have come to used in all NATO countries pursuant to the NATO Standardization Agreements (STANAGs).

OPTICAL ZOOM VS. DIGITAL ZOOM

Optical zoom changes the lens system or focal length to alter magnification while continuing to use the detector’s available pixels. Digital zoom enlarges and crops the captured image; it can make a target appear larger on the display but does not create additional source detail.

PHOTOCATHODE

The input surface of an image intensifier tube that absorbs light energy (photons) and in turn releases electrical energy (electrons) in the form of an image. The type of material used is a distinguishing characteristic of the different generations.

PHOTOCATHODE SENSITIVITY

Photocathode sensitivity is a measure of how well the image intensifier tube converts light into an electronic signal so it can be amplified. The measuring units of photocathode sensitivity are micro-amps/lumen (µA/lm) or microamperes per lumen. This criterion specifies the number of electrons released by the Photocathode (PC). PC response is always measured in isolation with no amplification stage or ion barrier (film). Therefore, tube data sheets (which always carry this “raw” figure) do not reflect the fact that over 50% of those electrons are lost in the ion barrier. While for most latest 3rd generation image intensifiers the photo response is in the 1800 µA/lm (2000 µA/lm for the latest Omni VI Pinnacle tubes), the actual number is more like 900 µA/lm.

PICATINNY RAIL/ MOUNT

Named after the Picatinny Arsenal in New Jersey, where it was developed, the rail comprises a series of ridges with a T-shaped cross-section interspersed with flat “spacing slots”. Scopes et al. are mounted either by sliding them on from one end or the other; by means of a “rail-grabber” which is clamped to the rail with bolts, thumbscrews or levers; or onto the slots between the raised sections. Picatinny rail sections are the current standard attachment methods for weapon accessories among US and NATO forces.

REFRESH RATE

Refresh rate, stated in hertz (Hz), is how many times per second a thermal image updates. Higher refresh rates can make motion appear smoother, while battery life, processing and display behavior also influence the viewing experience.

RESOLUTION

The ability of an image intensifier or night vision system to distinguish between objects close together. Image intensifier resolution is measured in line pairs per millimeter (lp/mm) while system resolution is measured in cycles per milliradian. For any particular night vision system, the image intensifier resolution will remain constant while the system resolution can be affected by altering the objective or eyepiece optics by adding magnification or relay lenses. Often the resolution in the same night vision device is very different when measured at the centre of the image and at the periphery of the image. This is especially important for devices selected for photograph or video where the entire image resolution is important. Measured in line pairs per millimeter (lp/mm).

Thermal detector resolution is measured as a pixel matrix. More pixels can preserve finer scene detail, but digital zoom only enlarges and crops the captured image. At 2× digital zoom, roughly half the source width and half the source height remain in view, so the enlarged image uses about one-quarter of the original source pixels.

Compare thermal resolution together with pixel pitch, NETD, lens focal length, base magnification, display resolution and image processing. No single specification determines the complete viewing experience.

RETICLE (RETICLE PATTERN)

An adjustable aiming point or pattern (i.e. crosshair) located within an optical weapon sight

SIGNAL-TO-NOISE RATIO (SNR)

A measure of the light signal reaching the eye divided by the perceived noise as seen by the eye. A tube’s SNR determines the low light resolution of the image tube; therefore, the higher the SNR, the better the ability of the tube to resolve objects with good contrast under low-light conditions. Because SNR is directly related to the photocathode’s sensitivity and also accounts for phosphor efficiency and MCP operating voltage, it is the best single indicator of an image intensifier’s performance

SCINTILLATION

Also known as electronic noise. A faint, random, sparkling effect throughout the image area. Scintillation is a normal characteristic of Microchannel plate image intensifiers and is more pronounced under low-light-level conditions

SCREEN

The image tube output that produces the viewable image. Phosphor (P) is used on the inside surface of the screen to produce the glow, thus producing the picture. Different phosphors are used in image intensifier tubes, depending on manufacturer and tube generation. P-20 phosphor is used in the systems offered in this catalogue.

STADIAMETRIC RANGEFINDER

Allows the user to calculate the approximate distance to an object if its size is known.

STEREOSCOPIC NIGHT VISION

When two views or photographs are taken through one device. One view/photograph represents the left eye, and the other the right eye. When the two photographs are viewed in a stereoscopic apparatus, they combine to create a single image with depth and relief. Sometimes this gives two perspectives. However, it is usually not an issue because the object of focus is far enough away for the perspectives to blend into one.

SYSTEM GAIN

Equal to tube gain minus losses induced by system components such as lenses, beam splitters and filters. 

THERMAL COLOR PALETTES

Thermal color palettes map measured temperatures to display colors. Common choices include white hot, black hot, red hot, rainbow and color alarm modes. Palettes change how the data is displayed; they do not change the detector’s native resolution or sensitivity.

THERMAL DISPLAY RESOLUTION

Display resolution is the pixel count of the screen viewed through the eyepiece and is separate from detector resolution. A high-resolution display can make menus and imagery easier to view, but it cannot recover scene detail that the detector did not capture.

VARIABLE GAIN CONTROL

Allows the user to manually adjust the gain control ( basically like a dim control ) in varying light conditions. This feature sets the PVS-14 apart from other popular monoculars that do not offer this feature.

WEAVER MOUNTING SYSTEM

A US weapon mounting system used for attaching sighting devices to weapons. A Weaver Rail is a weapon-unique notched metal rail designed to receive a mating throw-lever or Weaver Squeezer attached to the sighting device

ZEROING

A method of boresighting an aiming device to a weapon and adjusting to compensate for projectile characteristics at known distances.

Thermal and Night Vision Glossary FAQs

What is the difference between thermal imaging and night vision?

Thermal imaging detects differences in emitted heat and can work in darkness without visible light. Traditional image-intensifier night vision amplifies available light, while digital night vision uses a camera sensor and may benefit from an IR illuminator.

What does thermal resolution mean?

Thermal resolution is the detector’s pixel matrix, such as 384 × 288, 640 × 512 or 1280 × 1024. More pixels can show finer detail, but lens quality, NETD, magnification, processing and display resolution also matter.

What is NETD in a thermal optic?

NETD is a sensitivity measurement stated in millikelvin. A lower number generally means the detector can distinguish smaller temperature differences, especially in humid or low-contrast conditions.

What do FOM and SNR mean in night vision?

SNR describes the strength of the useful image signal compared with visible noise. FOM is commonly calculated by multiplying image-intensifier resolution by SNR. Both are useful comparison points, but neither replaces a complete tube specification sheet.

What is the difference between an IR illuminator and an IR laser?

An IR illuminator spreads infrared light over an area to help compatible night vision devices see the scene. An IR laser projects a narrow aiming or pointing beam. Check wavelength, power, safety classification and device compatibility before use.

Related Resources